The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro?
From Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro
To get from Riggs Rd Ne+Nicholson St NE to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the P15 bus from Riggs Rd Ne+Nicholson St NE station to Fort Totten+Bay D station. Next, you’ll have to switch to the GREEN metro and finally take the P84 bus from Branch Ave Station + Bus Bay E station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 1 hr 22 min. The ride fare is $2.00. The bus and metro schedule from Riggs Rd Ne+Nicholson St NE may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
82min$2.00
P15
P84
Leaves from Riggs Rd Ne+Nicholson St NE
Step by Step
- 1
Start from bus stationRiggs Rd Ne+Nicholson St NE - 2P15Wait for busP15South To Fort Totten
- 3
Ride to bus stationFort Totten+Bay DID 10032375 min - 4Walk to metro stationFort Totten60 yd • 1 min
- 5GREENWait for metroGREENBranch Av
- 6Ride to metro stationBranch Avenue36 min
- 7Walk to bus stationBranch Ave Station + Bus Bay EID 3003290100 yd • 2 min
- 8P84Wait for busP84Brandywine Crossing Shopping Center
- 9Ride to bus stationBrandywine Road at Opp. Horseshoe RoadID 3335321 min
- 10Walk toClinton, MD200 yd • 3 min
*Duration based on 8am traffic
Public transit directions from Riggs Rd Ne+Nicholson St NE to Clinton, MD
The distance between Riggs Rd Ne+Nicholson St NE, Prince George's County and Clinton, MD, Prince George's County is approximately 23.49 mi, which can typically be travelled in 82 min. Moovit will show you the directions from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Riggs Rd Ne+Nicholson St NE to Clinton, MD
To check the bus and metro schedule from Riggs Rd Ne+Nicholson St NE to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Riggs Rd Ne+Nicholson St NE) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Riggs Rd Ne+Nicholson St NE to Clinton, MD?
The fastest way takes 82 minutes, using Bus line P15, Metro line GREEN, Bus line P84.
Is there a direct bus between Riggs Rd Ne+Nicholson St NE and Clinton, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 1 hr 22 min.
Which bus line goes from Riggs Rd Ne+Nicholson St NE to Clinton, MD?
The P15 bus line goes from Fort Totten+Bay D station near Riggs Rd Ne+Nicholson St NE in Washington to Fort Totten station. From there you’ll have to take one bus line and one metro line till Fort Totten station near Clinton, MD in Prince George's County.
How long does it take to travel from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro?
The total travel time between Riggs Rd Ne+Nicholson St NE in Washington and Clinton, MD in Prince George's County by bus and metro is about 1 hr 22 min.
Where do I get on the bus near Riggs Rd Ne+Nicholson St NE to get to Clinton, MD?
Get on the P15 bus from the Fort Totten+Bay D stop near Riggs Rd Ne+Nicholson St NE in Washington.
Where do I get off the bus when travelling between Riggs Rd Ne+Nicholson St NE and Clinton, MD?
Get off the bus at the Fort Totten stop, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Riggs Rd Ne+Nicholson St NE to Clinton, MD?
The ride from Riggs Rd Ne+Nicholson St NE to Clinton, MD costs $2.00.
Popular Routes
- Silver Spring Station + Bus Bay 114 to Ocean City
- Baltimore to Greenbelt
- Brandywine to Rockville
- Glenmont to Ronald Reagan Washington National Airport
- Odenton to Columbia
- Baltimore to Andrews Afb
- Greenbelt to Columbia
- Downtown Largo Metro Station to Elkridge
- Baltimore Penn Station to Lexington Park
- Landover to Annapolis
- Bethesda Metro Station to Washington Dulles International Airport
- Herndon to Manassas Park
- Silver Spring to Greenbelt
- Ronald Reagan Washington National Airport (Dca) to Smithsonian Institution
- Annapolis to Johns Hopkins University
- Dunn Loring to Falls Church
- Wheaton to Springfield
- Laurel to Columbia
- Rockville to Frederick
- Greenbelt to University Of Maryland Baltimore (Umbc)