The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD by bus and metro?
From Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD by bus and metro
To get from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the C31 bus from Minnesota Av Se+Nicholson St SE station to Howard Rd Se+Anacostia station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 1 hr 15 min. The ride fare is $2.00. The bus and metro schedule from Pennsylvania Av Se+L'Enfant Sq SE may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
75min$2.00
C31
P85Leaves from Minnesota Av Se+Nicholson St SE
Step by Step
- 1Walk to bus stationMinnesota Av Se+Nicholson St SEID 1000473240 yd • 3 min
- 2C31Wait for busC31West To Navy Yard
- 3
Ride to bus stationHoward Rd Se+AnacostiaID 100036313 min - 4Walk to metro stationAnacostia Metro Station30 yd • 1 min
- 5GREENWait for metroGREENBranch Av
- 6Ride to metro stationBranch Avenue14 min
- 7Walk to bus stationBranch Ave Station + Bus Bay FID 300263180 yd • 2 min
- 8P85Wait for busP85Southern Maryland Hospital
- 9Ride to bus stationPiscataway Road at Brandywine RoadID 3806029 min
- 10Walk toClinton, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD
The distance between Pennsylvania Av Se+L'Enfant Sq SE, Prince George's County and Clinton, MD, Prince George's County is approximately 16.83 mi, which can typically be travelled in 75 min. Moovit will show you the directions from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD
To check the bus and metro schedule from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Pennsylvania Av Se+L'Enfant Sq SE) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD?
The fastest way takes 75 minutes, using Bus line C31, Metro line GREEN, Bus line P85.
Is there a direct bus between Pennsylvania Av Se+L'Enfant Sq SE and Clinton, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 1 hr 15 min.
Which bus line goes from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD?
The C31 bus line goes from Minnesota Av Se+Nicholson St SE station near Pennsylvania Av Se+L'Enfant Sq SE in Washington to Howard Rd Se+Anacostia station. From there you’ll have to take one bus line and one metro line till Howard Rd Se+Anacostia station near Clinton, MD in Prince George's County.
How long does it take to travel from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD by bus and metro?
The total travel time between Pennsylvania Av Se+L'Enfant Sq SE in Washington and Clinton, MD in Prince George's County by bus and metro is about 1 hr 15 min.
Where do I get on the bus near Pennsylvania Av Se+L'Enfant Sq SE to get to Clinton, MD?
Get on the C31 bus from the Minnesota Av Se+Nicholson St SE stop near Pennsylvania Av Se+L'Enfant Sq SE in Washington.
Where do I get off the bus when travelling between Pennsylvania Av Se+L'Enfant Sq SE and Clinton, MD?
Get off the bus at the Howard Rd Se+Anacostia stop, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD?
The ride from Pennsylvania Av Se+L'Enfant Sq SE to Clinton, MD costs $2.00.
Popular Routes
- Baltimore County to Harford County
- Falls Church to Rockville
- Union Station to Herndon, Virginia
- Gainesville Park And Ride to Reston, Virginia
- Laurel to Ellicott City
- Catonsville to Hyattsville
- Washington Dulles International Airport (Iad) to Adams Morgan
- Perryville to Aberdeen
- Ronald Reagan Washington National Airport (Dca) to Johns Hopkins University
- Montgomery County to Annapolis
- Baltimore to Kensington
- Van Dorn Street Metro Station to New Carrollton
- Fredericksburg to Indian Head
- Shady Grove to Dulles International Airport (Iad)
- Noma-Gallaudet U to Vienna
- New Carrollton, Md to Ronald Reagan Washington National Airport
- Smithsonian Metrorail to Odenton, MD
- Catonsville to Silver Spring
- Glenmont to Olney
- Huntington to Mount Vernon