The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Livingston Rd & Fort Washington Rd to Clinton, MD by bus?
From Livingston Rd & Fort Washington Rd to Clinton, MD by bus
To get from Livingston Rd & Fort Washington Rd to Clinton, MD in Prince George's County, you’ll need to take 3 bus lines: take the P97 bus from Livingston Rd & Fort Washington Rd station to Oxon Hill Park & Ride station. Next, you’ll have to switch to the P87 bus and finally take the P84 bus from Old Branch Avenue at Allentown Way station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 1 hr 1 min. The ride fare is $1.50. The bus schedule from Livingston Rd & Fort Washington Rd may change. We recommend you check the updated bus schedule to Clinton, MD on the Moovit app.
1 hr 1 min$1.50
P97P87P84
Leaves from Livingston Rd & Fort Washington Rd
Step by Step
- 1
Start from bus stationLivingston Rd & Fort Washington Rd - 2P97Wait for busP97North To Southern Av
- 3
Ride to bus stationOxon Hill Park & Ride19 min - 4Walk to bus stationOxon Hill P+R+Bay AID 300433380 yd • 1 min
- 5P87Wait for busP87East To Suitland
- 6Ride to bus stationAllentown Rd & Old Branch AveID 300273518 min
- 7Walk to bus stationOld Branch Avenue at Allentown WayID 3000335330 yd • 4 min
- 8P84Wait for busP84Brandywine Crossing Shopping Center
- 9Ride to bus stationBrandywine Road at Opp. Horseshoe RoadID 3335314 min
- 10Walk toClinton, MD200 yd • 3 min
*Duration based on 8am traffic
Public transit directions from Livingston Rd & Fort Washington Rd to Clinton, MD
The distance between Livingston Rd & Fort Washington Rd, Prince George's County and Clinton, MD, Prince George's County is approximately 17.14 mi, which can typically be travelled in 61 min. Moovit will show you the directions from Livingston Rd & Fort Washington Rd to Clinton, MD by bus, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus schedule from Livingston Rd & Fort Washington Rd to Clinton, MD
To check the bus schedule from Livingston Rd & Fort Washington Rd to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Livingston Rd & Fort Washington Rd) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Livingston Rd & Fort Washington Rd to Clinton, MD?
The fastest way takes 61 minutes, using Bus line P97, Bus line P87, Bus line P84.
Is there a direct bus between Livingston Rd & Fort Washington Rd and Clinton, MD in Prince George's County?
No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 1 min.
Which bus line goes from Livingston Rd & Fort Washington Rd to Clinton, MD in Prince George's County?
The P97 bus line goes from Oxon Hill Park & Ride station near Livingston Rd & Fort Washington Rd to Oxon Hill P+R+Bay A station. From there you’ll have to take one bus line till Oxon Hill P+R+Bay A station near Clinton, MD in Prince George's County.
How long does it take to travel from Livingston Rd & Fort Washington Rd to Clinton, MD in Prince George's County by bus?
The total travel time between Livingston Rd & Fort Washington Rd and Clinton, MD in Prince George's County by bus is about 1 hr 1 min.
Where do I get on the bus near Livingston Rd & Fort Washington Rd to get to Clinton, MD in Prince George's County?
Get on the P97 bus from the Oxon Hill Park & Ride stop near Livingston Rd & Fort Washington Rd in Prince George's County.
Where do I get off the bus when travelling between Livingston Rd & Fort Washington Rd and Clinton, MD in Prince George's County?
Get off the bus at the Oxon Hill P+R+Bay A stop, which is closest to Clinton, MD in Prince George's County.
How much is the bus fare from Livingston Rd & Fort Washington Rd to Clinton, MD?
The ride from Livingston Rd & Fort Washington Rd to Clinton, MD costs $1.50.
Popular Routes
- Arlington to Annapolis
- Waldorf to Odenton
- Navy Yard Metro Station to College Park
- Rockville to College Park
- Silver Spring to Prince Frederick
- Washington to Summerfield
- Bethesda+Bay B to Damascus, MD
- Branch Avenue to Silver Spring
- Falls Church to White House
- Bethesda Metro Station to Washington Dulles International Airport
- Union Station to Burke
- Bethesda to Severn
- College Park–University Of Maryland to Towson University
- Gaithersburg to Baltimore
- Lusby to Lexington Park
- Mcpherson Sq Metro Station to Washington National Airport (Dca)
- Alexandria to Wolf Trap
- Camden Yards to Columbia, MD
- Wiehle-Reston to Washington Union Station
- College Park to Fairfax