(BE: staging)

How to get from San Martino to Design Campus by bus?

From San Martino to Design Campus by bus

To get from San Martino to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the S11 bus from San Martino station to Fontebecci station. Next, you’ll have to switch to the 131R bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 2 hr 33 min. The bus schedule from San Martino may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.

153min
Bus - S11S11
Bus - 131R131R
Bus - 5757
Walk to Design Campus
Leaves from San Martino

Step by Step

  • 1
    Start from bus station
    Start from bus station
    San Martino
  • 2
    Bus - S11S11
    Wait for bus
    S11
    Gramsci Square
  • 3
    Ride to bus station
    Ride to bus station
    Fontebecci
    ID SI0260
    7 min
  • 4
    Walk to bus station
    Walk to bus station
    Fontebecci
    ID SI0382
    30 m • 1 min
  • 5
    Bus - 131R131R
    Wait for bus
    131R
    Florence Bus Station
  • 6
    Ride to bus station
    Ride to bus station
    Leopolda T1 Porta Al Prato
    ID FI5751
    71 min
  • 7
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    320 m • 5 min
  • 8
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 9
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    44 min
  • 10
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from San Martino to Design Campus

The distance between San Martino, Calenzano and Design Campus, Calenzano is approximately 84.49 km, which can typically be travelled in 153 min. Moovit will show you the directions from San Martino to Design Campus by bus, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.

Bus schedule from San Martino to Design Campus

To check the bus schedule from San Martino to Design Campus using the Moovit app, first download and open the app on your smartphone. Enter your starting point (San Martino) and destination (Design Campus), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Questions & Answers

  • What is the fastest way to get from San Martino to Design Campus?

    The fastest way takes 153 minutes, using Bus line S11, Bus line 131R, Bus line 57.

  • Is there a direct bus between San Martino and Design Campus?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 2 hr 33 min.

  • Which bus line goes from San Martino to Design Campus?

    The S11 bus line goes from Fontebecci station near San Martino in Monteriggioni to Fontebecci station. From there you’ll have to take one bus line till Fontebecci station near Design Campus in Calenzano.

  • How long does it take to travel from San Martino to Design Campus by bus?

    The total travel time between San Martino in Monteriggioni and Design Campus in Calenzano by bus is about 2 hr 33 min.

  • Where do I get on the bus near San Martino to get to Design Campus?

    Get on the S11 bus from the Fontebecci stop near San Martino in Monteriggioni.

  • Where do I get off the bus when travelling between San Martino and Design Campus?

    Get off the bus at the Fontebecci stop, which is closest to Design Campus in Calenzano.

Popular Routes