(BE: staging)

How to get from John And Paul CH to Ringsend by bus?

From John And Paul CH to Ringsend by bus

To get from John And Paul CH to Ringsend in Dublin, you’ll need to take 3 bus lines: take the 343 bus from John And Paul CH station to William Street station. Next, you’ll have to switch to the 300 bus and finally take the C1 bus from Bachelors Walk station to Ringsend station. The total trip duration for this route is approximately 240 min. The bus schedule from John And Paul CH may change. We recommend you check the updated bus schedule to Ringsend on the Moovit app.

240min
Walk to bus station
Bus - 343343
Bus - 300300
Bus - C1C1
Walk to Ringsend
Leaves from John And Paul CH

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    John And Paul CH
    ID 337701
    10 m • 1 min
  • 2
    Bus - 343343
    Wait for bus
    343
    Limerick Bus Station
  • 3
    Ride to bus station
    Ride to bus station
    William Street
    ID 607111
    28 min
  • 4
    Walk to bus station
    Walk to bus station
    Limerick Arthur's Quay
    ID 605551
    310 m • 5 min
  • 5
    Bus - 300300
    Wait for bus
    300
    Bachelors Walk
  • 6
    Ride to bus station
    Ride to bus station
    Bachelors Walk
    ID 316
    165 min
  • 7
    Walk to bus station
    Walk to bus station
    Bachelors Walk
    ID 315
    40 m • 1 min
  • 8
    Bus - C1C1
    Wait for bus
    C1
    Sandymount
  • 9
    Ride to bus station
    Ride to bus station
    Ringsend
    ID 356
    14 min
  • 10
    Walk to Ringsend
    Walk to
    Ringsend
    Parkview Place
    30 m • 1 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Ireland.
All local mobility options in one app

Public transit directions from John And Paul CH to Ringsend

The distance between John And Paul CH, Dublin and Ringsend, Dublin is approximately 219.69 km, which can typically be travelled in 240 min. Moovit will show you the directions from John And Paul CH to Ringsend by bus, so no matter how you choose to travel in Dublin – you will always have plenty of easy options.

Bus schedule from John And Paul CH to Ringsend

To check the bus schedule from John And Paul CH to Ringsend using the Moovit app, first download and open the app on your smartphone. Enter your starting point (John And Paul CH) and destination (Ringsend), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Questions & Answers

  • What is the fastest way to get from John And Paul CH to Ringsend?

    The fastest way takes 240 minutes, using Bus line 343, Bus line 300, Bus line C1.

  • Is there a direct bus between John And Paul CH and Ringsend?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 240 min.

  • Which bus line goes from John And Paul CH to Ringsend?

    The 343 bus line goes from John And Paul CH station near John And Paul CH in Shannon to William Street station. From there you’ll have to take one bus line till William Street station near Ringsend in Dublin.

  • How long does it take to travel from John And Paul CH to Ringsend by bus?

    The total travel time between John And Paul CH in Shannon and Ringsend in Dublin by bus is about 240 min.

  • Where do I get on the bus near John And Paul CH to get to Ringsend?

    Get on the 343 bus from the John And Paul CH stop near John And Paul CH in Shannon.

  • Where do I get off the bus when travelling between John And Paul CH and Ringsend?

    Get off the bus at the William Street stop, which is closest to Ringsend in Dublin.

Popular Routes